Product Details

Go Back

PA-ZM

Description

The POPE Professional® PA Series amplifiers are specially designed for permanent installation. It’s unique design and powerful output can meet the requirement of any sound reinforcement project.

MORE INFO

PA-ZM

Applications

- The PA Series amplifiers can use in meeting rooms
- classrooms / schools
- houses of worship
- courtrooms
- multi zone paging / music
- theme parks
- museums
- office and etc.

Features

- Mp3 (USB) / FM / Bluetooth Media player
- 6 zones available
- 3 zones with on/off & 3 zones with volume knobs
- 2 channels and 3 microphone inputs
- Alarm signal & evacuation signal for emergency
- Chime for public address
- 4-16 ohm, 70/100V outputs
- 12/24V output for broadcast emergency announcement
- Priority control

Power Output

Model	PA-60ZM	PA-120ZM	PA-240ZM	PA-480ZM	PA-800ZM	PA-1200ZM
Number of channels	1	1	1	1	1	1
Total output (4 - 16 Ω)	60 W	120 W	240 W	480 W	800 W	1200 W

Specifications

70V Output Impedance	50Ω	33.5Ω		20Ω	14Ω		11Ω		8.5Ω
100V Output Impedance	100Ω	67Ω		40Ω	28Ω		22Ω		17Ω
Media Player	Mp3 (USB) / FM / Bluetooth
Aux Input	300Mv
Mic Input	4mV
PEC Out	650mV - 750mV
Front Panel Control	3 Mic, 2 Aux, 1 Media Player, Alarm, 6 Zone, Bass, Treble, Master, Power on/off
Frequency Response	±0.1 dB from 20 Hz to 20 kHz at 1 watt
Phase Response	±10 degrees from 10 Hz to 20 kHz at 1 watt
THD	0.05%

Intermodulation Distortion	<0.35% (60 Hz and 7 kHz at 4:1, from full rated output to -30dB)
Signal-to-Noise Ratio	>80 dB
CMRR (20 Hz to 1 kHz)	> 55 dB, typically > 70 dB
Crosstalk	> 80 dB (below rated power, 20 Hz to 1 kHz)
Slew Rate	80V/usec
Damping Factor	>800 from 10 Hz to 400 Hz
Output Circuitry	Class H
Output Connector	Barrier strip
Input Connectors	3-pin Combo XLR, RCA
LED Indicator	Power, Signal, Protect, Clip
Protection	Protected against shorted, open or mismatched loads, overloaded power supplies, excessive temperature, chain destruction phenomena, input overload damage and high-frequency blowups. loudspeakers from input/output DC and turn-on/turn-off transients
Cooling System	Internal heat sinks fitted with fan
Construction	Steel chassis with durable black powder coat finish
Power Supply	Toroidal Transformer
Power Range	200 - 240V AC @ 50Hz
Mains	Power Cord
Input Power (Watts)	145W	215W	550W		1150W	1400W		1600W
Dimension(Wx D x H)	483 mm × 320 mm × 88 mm					483 mm × 320 mm × 132 mm
	2U					3U
100V Output Impedance	9kg (19.83lbs)	10kg(22.04lbs)	12kg(26.44lbs)		14.5kg(31.95lbs)	20kg(44.08lbs)		24kg(52.89lbs)

Note:

1)All specifications are typical values.

2)The amplifier will be fully operational at 2 ohm loads, but due to physical constraints in the construction, this mode of operation is not recommended.

3)The output power measured with 1kHz, 20ms burst, both channels driven.